Vigor 2860n Plus

Vigor 2860n Plus

The Vigor 2860 series (including the Vigor 2860n and Vigor 2860Vn) is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary xDSL modems or a 3G/4G cellular service using a supported USB adaptor. This latest router series includes support for professional features such as VLAN tagging, Gigabit Ethernet built-in WiFi ('n' models).

Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connectivity and security. Compatible with all UK variants of ADSL (including ADSL2+ and Annex M), VDSL and VDSL2, the Vigor 2860 can also be used for cable-modem, leased line and EFM applications using its Gigabit Ethernet WAN port. On VDSL, the Vigor 2860 series supports the very latest services for speeds up to 80Mb/s (depending on line quality and length).

A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls and an object based firewall management system.


Runs on either ADSL or VDSL

The Vigor2860's built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor2860's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided and powered by a cabinet in your street - that's where the line terminates. ADSL service, on the other hand, comes all the way from your local exchange, which coul be miles away and is powered from there. That means that if your street's VDSL cabinet is damaged, its DSLAM fails or you lose power to your street, you lose VDSL, but your ADSL line comes via a different method and route, so it's less likely that both would be affected. These failover methods can also be used instead for the other WAN ports on the router (Ethernet or 3G).


Robust & Comprehensive Firewall

Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems. The latest ('Version 3') DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2860 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can now be selectively applied to specific users.


IPv6 - Next Generation Internet Routing

The Vigor 2860 supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2860 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers.

IPv6 on the Vigor 2860 series provides the following features:

  • Operation on any one of the WAN ports (ADSL/VDSL, Ethernet or 3G)
  • Connectivity to direct native IPv6 ISPs
  • Built-in tunneling to 3rd party IPv6 brokers supporting TSPC or AICCU methods
  • Default stateful firewall for all IPv6 LAN Clients/Devices
  • DHCPv6 Client or Static IPv6 Client
  • DHCPv6 & RADVD for client configuration
  • IP Filtering Rules
  • QoS for IPv6 with DiffServ
  • Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List
  • Simultaneous (concurrent) operation with IPv4 ("Dual-Stack")
  • Other router features are available on IPv4 only currently


Technical Specifications

Physical Interfaces:

  • LAN Ports (Switch):
    • 6 X Gigabit Ethernet (1000Mb/s) Ports
    • Port-Based VLAN (Inclusive/Exclusive Groups)
    • 802.1q VLAN Tagging
  • WAN Ports:
    • WAN1 : ADSL/VDSL, RJ11
    • WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
    • WAN3 : USB Port for 3G Cellular Modem or Printer
  • Phone Ports : 2 x BT Type sockets. FXS type (V2860Vac only)
  • Line Port : For POTS/PSTN voice line connection (V2860Vac only)
  • Performance:
    • Firewall: Up to 300Mb/s max
    • IPSec VPN: Up to 50Mb/s max
  • ADSL Compatibility:
    • ANSI T1.413 Issue2
    • ITU-T G.992.1 G.dmt (ADSL)
    • ITU-T G.992.2 G.lite
    • ITU-T G.992.3 ADSL2
    • ITU-T G.992.5 ADSL2+
    • Annex L (READSL)
    • Annex A
    • Annex M
    • ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
    • DSL Forum : TR-048/67 & TR-100
  • VDSL Compatibility:
    • BT Infinity Option 1 & Option 2 Compatible
    • BT SIN 498 MCT Approved 
    • Support for G.INP & Vectoring  
    • ITU-T VDSL2 G.993.2
    • ITU-T G.993.1, G.997.1
    • Band Plan: G.998, G.997
    • Annex A, Annex B, Annex C
    • VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
    • OLR, UPBO, DPBO Supported
    • US0 Supported
    • Loop Diagnostic Mode
    • DSL Forum WT-114
  • Load Balance/Failover Features:
    • Outbound Policy-Based Load-Balance
    • WAN Connection Fail-over
    • BoD (Bandwidth on Demand)
    • WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
  • Vigor 2860 ATM Protocols (DSL):
    • RFC-2684/RFC-1483 Multiple Protocol over AAL5
    • RFC-2516 PPP over Ethernet
    • RFC-2364 PPP over AAL5
    • PPPoE pass through LAN/WLAN
    • PPPoE/PPPoA Relay
    • Transparent bridge for MPoA
    • Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
    • Support for RFC4638 for MTU up to 1500
  • Wireless LAN Features ('n' and 'n-plus' Models Only):
    • 802.11n Compatible with backward support for 802.11b/g
    • 802.11a ( (Vigor 2860n-plus only)
    • Simultaneous Dual Band (2.4Ghz/5Ghz) (Vigor 2860n-plus only)
    • Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
    • Packet Aggregation and Channel Bonding
    • Optional Higher Gain or directional aerials available
    • Active Client list in Web Interface
    • Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
    • 64/128-bit WEP Encryption
    • WPA/WPA2 Encryption
    • Switchable Hidden SSID
    • Restricted access list for clients (by MAC address)
    • Time Scheduling (WLAN can be disabled at certain times of day)
    • Access Point Discovery
    • WDS (Wireless Distribution system) for WLAN Bridging and Repeating
    • 802.1x Radius Authentication
    • Wireless VLAN
    • Wireless Rate-Control
    • Automatic Power Management
    • 802.11e WMM (Wi-Fi Multimedia)
  • VoIP Features (Vigor2860Vac only):
    • Protocols: SIP, RTP / RTCP
    • 12 SIP Registrar Accounts (for up to 12 VoIP providers)
    • Line port for PSTN Passthrough (integrates POTS line)
    • Auto-fallback to PSTN under power/Internet failure
    • G.168 Line Echo-cancellation
    • Automatic Gain Control
    • Jitter Buffer ( 125ms )
    • Voice Codecs:
      • G.711 A / µ Law
      • G.723.1
      • G.726
      • G.729 A / B
    • VAD / CNG
    • Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
    • DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
    • FAX / Modem Support G.711 Pass-through
    • T.38 for FAX
    • Supplemental Services:
      • Caller ID
      • Call Hold / Retrieve
      • Call Waiting
      • Call Waiting with Caller ID
      • Call Transfer
      • Call Forwarding ( Always , On Busy and On No Answer )
      • DND (Do not Disturb)
      • Call Barring ( Incoming / Outgoing )
      • MWI ( Message Waiting Indicator ) ( RFC-3842 )
      • Hotline (Dial preset number when handset lifted)
  • WAN Protocols (Ethernet):
    • DHCP Client
    • Static IP
    • PPPoE
    • PPTP
    • BPA
  • Firewall & Security Features:
    • CSM (Content Security Management):
      • URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
      • Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
      • Prevent accessing of web sites by using their direct IP address (thus URLs only)
      • Blocking automatic download of Java applets and ActiveX controls
      • Blocking of web site cookies
      • Block http downloads of file types :
        • Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
        • Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
        • Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
      • Time Schedules for enabling/disabling the restrictions
      • Block popular P2P (Peer-to-Peer) file sharing programs 
      • Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
      • DNS Filter : Use DNS to enforce categorisation NEW!
      • Web Portal NEW!
    • Multi-NAT, DMZ Host
    • Port Redirection and Open Port Configuration
    • Policy-Based Firewall
    • MAC Address Filter
    • SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
    • DoS / DDoS Protection
    • IP Address Anti-spoofing
    • E-Mail Alert and Logging via Syslog
    • Bind IP to MAC Address
  • Bandwidth Management:
    • QoS
    • Guaranteed Bandwidth for VoIP
    • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
    • Layer 2&3 (802.1p & TOS/DCSP)
    • DiffServ Code Point Classifying
    • 4-level Priority for each Direction (Inbound / Outbound)
    • Bandwidth Borrowed
    • Temporary (5 minute) Quick Blocking of any LAN Client
    • Bandwidth / Session Limitation
    • App QoS NEW!
  • Network/Router Management:
    • Web-Based User Interface (HTTP / HTTPS)
    • CLI ( Command Line Interface ) / Telnet / SSH
    • Administration Access Control
    • Configuration Backup / Restore
    • Built-in Diagnostic Function
    • Firmware Upgrade via TFTP / FTP
    • Logging via Syslog
    • SNMP v3 Management with MIB-II
    • TR-069
    • TR-104
    • Access Point Management: Centrally Manage DrayTek APs
    • Switch Management: Centrallly Manage DrayTek Switches NEW!
  • VPN Facilities:
    • Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
    • Tunnelling Protocols: PPTP, IPSec, L2TP, L2TP over IPSec
    • IPSec Main and Agressive modes
    • IKE Phase 1 DiffieHelman Groups 1,2,5 & 14
    • IKE Phase 2 DiffieHelman Groups 1,2,5 & 14 (will match phase 1 selection)
    • Encryption : MPPE, DES and Hardware-Based AES (128/192/256bits) / DES / 3DES (168bits)
    • Authentication : Hardware-Based MD5, SHA-1 and SHA-256 (f/w 3.8.3 and later)
    • IKE Authentication : Pre-shared Key or X.509 Digital Signature
    • SSL VPN for teleworkers - Up to 5 simultaneous users. Proxy or tunnel
    • LAN-to-LAN & Teleworker-to-LAN connectivity
    • DHCP over IPSec
    • NAT-Traversal ( NAT-T )
    • Dead Peer Detection (DPD)
    • VPN Pass-Through
    • MOTP (Mobile One Time Password) for two factor authentication (2FA)
    • Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN NEW!
  • Network Features:
    • DHCP Client / Relay / Server
    • DHCP Option 66 support
    • Dynamic DNS
    • NTP Client (Synchronise Router Time)
    • Call Scheduling (Enable/Trigger Internet Access by Time)
    • RADIUS Client
    • Internal RADIUS Server NEW!
    • Microsoft™ UPnP Support
    • Maximum MTU 1534
  • Routing Protocols:
    • Static Routing
    • RIP V2
  • Operating Requirements:
    • Rack Mountable (Optional Vigor RM1 mounting bracket required)
    • Wall Mountable
    • Temperature Operating : 0°C ~ 45°C
    • Storage : -25°C ~ 70°C
    • Humidity 10% ~ 90% (non-condensing)
    • Power Consumption: 18 Watt Max.
    • Dimensions: L240.96 * W165.07 * H43.96 ( mm )
    • Operating Power: DC 15V (via external PSU, supplied)
    • Warranty : Two (2) Years RTB
    • Power Requirements : 220-240VAC


Write a review

Please login or register to review
  • Views: 2568
  • Brand: DrayTek
  • Product Code: V2860NP-K
  • Availability: 11
  • £217.20
  • Ex Tax: £181.00